Temperature Controller STC-3028 Max 12V

 

Description:
Switch the modes between cooling and heating;
Control the temperature by setting the temperature setting value and the difference value;
temperature calibration;
Refrigeration control output delay protection;
Alarm when the temperature exceeds the temperature limit or when a sensor error occurs.
Technical parameters:
Temperature measuring range: -20-80 Celsius
Measuring Humidity Range: 00% RH ~ + 100% RH:
Accuracy: 0.1 Celsius
Power supply: DC 12V/DC 24V/AC 110-220V
Sensor: NTC sensor
Relay Contact Capacity: Cool (10A/240VAC); Heat (10A/240VAC)
Sensor length: 1 meter (including the probe)
Shell material: PC and ABS
Set startup temperature (humidity):
Press the "up" button once to display the start temperature (humidity). Press and hold the "up" button for about 3 seconds, the required temperature (humidity) can be set with the up and down keys
''Up 1'' and ''Down 1'' are used for the temperature setting knob!
Set the stop temperature (humidity):
Press the "down" button once to display the stop temperature (humidity). Press and hold the button for about 3 seconds and the stop temperature (humidity) number will flash. The required temperature (humidity) can be set using the up and down buttons;
''Up 2'' and ''Down 2'' is used for the humidity setting button!
Temperature (hundity) correction:
Press the "up" and "down" buttons at the same time.